Get a Free Quote

Our representative will contact you soon.
Name
Email
Company Name
Message
0/1000

5L All-Electric Double Station

HSE‑5L / HSE II‑5L fully electric servo blow molding machines are high-speed clean production units, available in single-station and double-station versions for 5L HDPE containers. Free of hydraulic oil, they suit food, pharmaceutical and high hygiene packaging production with remarkable energy efficiency.

  • Dual configurations: single-station HSE‑5L and double-station HSE II‑5L to match different throughput targets.
  • Full servo-electric drive eliminates hydraulic oil, removing contamination risks for high-standard packaging.
  • Intelligent PLC control system supports early fault alerts and full-cycle production data recording.
  • High cycle speed delivers stable output while maintaining consistent wall thickness of finished bottles.
HSE‑5L & HSE II‑5L All Electric High Speed Extrusion Blow Molding Machine
Tongda’s HSE‑5L single-station and HSE II‑5L double-station blow molding machines are fully electric high-speed blow molding platforms, designed for hollow plastic containers ranging from 10mL to 50L in hygienic production environments. Unlike conventional hybrid blow molders fitted with hydraulic circuits for clamping and parison control, this series abandons all hydraulic components. It fundamentally eliminates oil contamination risks and cuts power consumption by 30%–50% compared with hydraulic counterparts. The dual-station HSE II‑5L delivers 10%–15% higher throughput than the single-station variant, forming a high-efficiency clean production solution for premium packaging manufacturers with strict hygiene standards.
Five Key Performance Features
·Zero Hydraulic Oil Design: Clamping, parison extrusion and part take-out movements are all driven by servo electric actuators, with no oil tank or pipelines to prevent oil pollution in high-standard production workshops.
·Intelligent PLC Monitoring: It supports real-time parameter tracking, advance fault warning and production data storage to reduce defective goods and facilitate production efficiency analysis.
·Significant Energy Savings: It removes continuously running hydraulic pumps, lowering electricity bills and bringing obvious economic benefits across the whole equipment service cycle.
·Alternating Double-Station Structure: Two mold stations work alternately sharing one extrusion head to raise output steadily while keeping uniform bottle wall thickness.
·Cleanroom Compatibility: The oil-free setup plus traceable data system meets GMP and ISO 13485 audit requirements for medical and regulated packaging production.
Application Scenarios
·Medical & Pharmaceutical Packaging: It produces reagent bottles and sample containers under pollution-free conditions to satisfy medical clean manufacturing requirements.
·Food-Grade Packaging: Ideal for edible oil, dairy and beverage containers made of HDPE, PE or PP to match global food safety certification demands.
·Daily & Industrial Chemical Packaging: Stable continuous output supports mass production of detergent and industrial chemical bottles for multi-shift manufacturing plants.
Why Procurement Teams Select the All-Electric Platform
Experienced buyers assess blow molding equipment mainly from energy consumption, maintenance workload and contamination risk. This all-electric HSE series performs well on all three dimensions: it cuts power use, eliminates hydraulic maintenance work and fundamentally avoids oil contamination hazards.
Founded in 1999, Suzhou Tongda Machinery ranks among China’s top three extrusion blow molding manufacturers for 15 consecutive years. Its annual output exceeds 1,200 machines, and over 9,000 units are running in more than 100 countries. All equipment carries CE, ISO 9001, TUV and SGS certifications to support international procurement audits.

Product Advantages

The HSE‑5L & HSE II‑5L all-electric blow molding series is built for manufacturers requiring hygienic, low-energy and high-speed hollow container production. It fits cleanroom environments and works reliably for medical, food and fine chemical packaging.

  • Oil-free servo structure meets strict GMP and clean production standards for regulated packaging industries.
  • Alternating double-station design lifts productivity without sacrificing product forming precision.
  • Built-in data tracking and warning system helps operators cut scrap rate and optimize line efficiency.
  • Lower power consumption and fewer hydraulic wearing parts reduce long-term factory operating expenditure.
Product Advantages 1
ITEM UNITS MODEL: HSE-5L MODEL: HSE II-5L
Model / HSE-5L HSE II-5L
Station / Single Double
Max.product volume L 5 5
Dry cycle PC/H 1300 1600
Output of HDPE KG/H 85 130
Weight of machine T 10 22
Size of machine (L*W*H) m 4.6*2.6*3.5 7.1*4*4.5
Platen distance MM 300-660 300-660
Mold moving stroke MM 550 550
Clamping force KN 100 100
Screw diameter MM 70 90
Screw length/Diameter ratio / 25:1 25:1
Screw heating power KW 13.2 17.4
No.of heating zone / 3 4
Screw motor power KW 22 37
Total power KW 66.25 106.9
Max.size of mold (W*H) mm 540*430 540*430

Application

Daily Chemical Industry

Daily Chemical Industry

Automotive Industry

Automotive Industry

Agriculture and Fisheries Industries

Agriculture and Fisheries Industries

Civilian Products Industry

Civilian Products Industry

Transportation Infrastructure Industry

Transportation Infrastructure Industry

Chemical Industry

Chemical Industry

Household Products Industry

Household Products Industry

Food and Medical Industries

Food and Medical Industries

Sports, Tourism, and Outdoor Leisure Industries

Sports, Tourism, and Outdoor Leisure Industries

Logistics Industry

Logistics Industry

Semiconductor Industry

Semiconductor Industry

Photovoltaic Industry

Photovoltaic Industry

Other Product Recommendations

Our Qualifications

Our company provides reliable quality and after-sales service. We have world leading imported production lines, such as HP Digital 6.90 0 printer, with no MOQ restrictions and guaranteed quality that meets US and European standards. We also cooperate with Fortune 500 companies and can provide ISO, UL, SGS, GMI, FSC certificates.

About Tongda

About Tongda

Tongda Machinery was established in 1999 as a technical enterprise integrating R&D, manufacturing, and sales for plastic blow molding machinery. The company grew to include three production bases in Fenghuang town and Tangqiao town with a total floor area of 100,000m and a construction area of 80,000m.

Today there are more than 400 staff members, including several senior engineers from Germany and America. Since 2012, Tongda has been voted as "first in the industry" by China Plastics Machinery Industry Association.

0+
Years of Experience
0+
Skilled Workers & Engineers
0+
Floor space(m²)
0machines
Annual Production

GLOBAL tongda

top 3 in China | 15+ Years
Domestic Market Share
GLOBAL tongda North America Europe Middle East Asia Pacific
27 years
Export Countries
1200⁺ Sets
Annual Production Capacity
100+
Exporting Countries/Areas
73 1 Item German Invention Paten
National Invention Patents
100,000+ M²
Production Base
500+
Global Customer First Choice
Frame 1000009605
Frame 1000009607
Frame 1000009608
Frame 1000009609
Frame 1000009610
siepla 1

FAQ

Quick answers to help you learn more about our offerings, processes, and how we can support your project needs.
Our servo-hydraulic and all-electric blow molding machines use advanced drive technology that adjusts power output based on real-time demand. This results in 30-40% energy savings compared to traditional hydraulic systems.
Additionally, our smart automation systems optimize production cycles to minimize idle time and energy waste.