10-25L HDPE Jerry Can & Drum
10L 20 Litre 25L HDPE Plastic Bottle Jerry Can Canister Drum Making Single Station Extrusion Blow Molding Machine
The 10L 20 Litre 25L HDPE Plastic Bottle Jerry Can Canister Drum Making Single Station Extrusion Blow Molding Machine from Suzhou Tongda Machinery Co., Ltd. is engineered for manufacturers who need dependable, energy-efficient production of 10L, 20L, and 25L hollow HDPE containers. With more than 4,000 units installed across 100+ countries, this single station extrusion blow molding machine offers a proven platform for producing jerry cans, canister drums, plastic bottles, and related packaging products at scale.
Choosing the right equipment for HDPE jerry can production depends on parison wall thickness control, hydraulic stability, and matching machine parameters to your specific resin grade — not just headline clamping force figures.
Technical Specifications
The following table summarizes the key specifications for this 10L 20 Litre 25L HDPE Plastic Bottle Jerry Can Canister Drum Making Single Station Extrusion Blow Molding Machine:
| Parameter | Specification |
|---|---|
| Container Volume Range | 10L – 25L |
| Configuration | Single station |
| Process | Extrusion blow molding |
| Compatible Materials | HDPE, PE, PP |
| Hydraulic System | Energy-saving servo hydraulic |
| Energy Savings | 10%–25% vs. conventional |
| Certifications | CE, ISO 9001, TUV, SGS |
| Custom Lead Time | Approx. 60 days after deposit |
Key Features
Energy-Saving Servo Hydraulic System
This single station extrusion blow molding machine uses an energy-saving servo hydraulic drive, cutting electricity consumption by 10%–25% compared to conventional fixed-speed hydraulic systems. For factories operating in high-electricity-cost markets or running continuous production shifts, this reduction directly lowers the operating cost per unit produced. The energy savings are most pronounced during idle and low-load phases — exactly the periods where fixed-speed systems waste the most power.
Market-Verified Performance Across 100+ Countries
With more than 4,000 units in active operation worldwide, the blow molding platform behind this machine has undergone real-world validation under a wide range of production conditions. The accumulated field experience is reflected in the current design: common failure modes have been addressed, and component selection is based on long-term reliability data rather than cost optimization alone.
HDPE, PE, and PP Material Compatibility
The machine supports HDPE, PE, and PP — the three most commonly used resins for industrial and packaging containers. Material changeovers between compatible resins do not require major mechanical disassembly, though process parameter adjustments are necessary. One practical note: the melt flow index of your HDPE grade must match the extruder screw geometry. Mismatches between resin MFI and screw design commonly cause parison instability and wall thickness deviation — a setup issue Tongda engineers address during customization and commissioning.
CE, ISO 9001, TUV, and SGS Certified
Full certification documentation is available for this blow molding machine, covering CE, ISO 9001, TUV, and SGS requirements. For buyers importing equipment into Europe, North America, or markets with strict machinery compliance requirements, this documentation simplifies customs clearance and supports factory audit processes.
Application Scenarios
Chemical and Industrial Packaging
This HDPE jerry can canister drum making machine is widely used to produce 10L–25L containers for chemical, agrochemical, and industrial liquid packaging. HDPE's resistance to common solvents combined with the seamless blow-molded construction — which eliminates weld lines — makes it the standard choice for hazardous liquid containers. Consistent wall thickness and part weight uniformity are controllable through proper machine setup and mold tooling design.
Consumer Goods and Daily-Use Containers
Household cleaning product drums, water storage containers, and personal care packaging in the 10L–25L range are also standard outputs for this single station blow molding machine. Surface finish quality and dimensional consistency tend to be more important in this segment. Single-station machines running a defined cycle typically produce more consistent shot-to-shot results for lower-volume, differentiated SKU production compared to multi-station configurations.
Why Tongda: Key Advantages
- 27+ Years of Blow Molding Expertise: Founded in 1999, Tongda has ranked among China's top three extrusion blow molding equipment manufacturers for 15 consecutive years and is a Vice President unit of the China Plastics Machinery Industry Association.
- Turnkey Project Capability: Tongda provides full turnkey support including factory layout planning, machine and mold installation, commissioning, and auxiliary equipment sourcing — reducing project management complexity for new production line builds.
- Spare Parts Included: A complete set of necessary spare parts is prepared and shipped with each machine, reducing downtime risk caused by sourcing delays after installation.
- 24-Hour After-Sales Support: Technical support is available around the clock via online channels, with video commissioning guidance and field engineer dispatch for on-site installation and operator training.
- Export Compliance Documentation: CE and ISO 9001 compliance files are provided to support import clearance and factory audit requirements in regulated markets.
Frequently Asked Questions
How do I get the correct price for this blow molding machine?
Contact Tongda with your target product dimensions, shape, annual production volume, and a reference photo. The team will recommend suitable machine models and provide a formal quotation for your specific production requirements.
Are spare parts included with the machine?
Yes. A full set of necessary spare parts is prepared and shipped with each machine before departure. Contact Tongda for the complete packing list.
What after-sales support is available?
Tongda provides 24-hour online technical support and video-guided commissioning assistance. Field engineers can also be dispatched to the buyer's facility for on-site installation and production startup.
Which plastic materials are compatible?
The machine processes HDPE, PE, and PP. Material selection should be based on chemical compatibility, wall strength, and surface finish requirements of the final container product.
Request a Quotation
To receive a detailed quotation for the 10L 20 Litre 25L HDPE Plastic Bottle Jerry Can Canister Drum Making Single Station Extrusion Blow Molding Machine, contact Suzhou Tongda Machinery with your container specifications, production volume targets, and target markets. The engineering team will recommend the appropriate machine configuration and mold setup for your requirements.